Description
Aditya PU Rubber – 60
Aditya PU Rubber – 60 is a pourable liquid PU rubber. It comes in 2 parts. Part A and Part B.
It cures into a flexible mould.
Pigments can be added. It’s mainly used for SPECIALLY SUITABLE FOR CONCRETE STAMPING.
IF YOU WANT TO REMOVE INSIDE BUBBLES ENTIRELY THEN, Open the lid of containers and put them open under sunlight for 1-2 hours or
warm these SEPARATELY in an oven up to 80 degrees then use.
Special Features
- Low Viscosity high flow
- Medium hardness
- Easy demoulding
- Can be made paste to apply with brush also.
- Long gel time
Applications
CONCRETE STAMPING
Technical Properties
Hardness Shore A………..After Cure………60
Mixing Ratio…………………Part A 1400: Part B 1000
Curing Time………………………………12 to 24 Hours
Colour……………………………………Yellowish
Packing
2.4 kg, and 24 kg
Small quantities of 5-10 remain in stock but more than that comes on order only, a Minimum 200 kg, For mould making its alternate is Silicone Rubber 4545, and Silicone Rubber 4545 always remains in stock.
Reviews
There are no reviews yet.