Aditya Silicone Rubber RTV 4545 – Easy 50:50 Ratio – 1 Kg.

Description

ADITYA SILICONE RUBBER RTV – 4545

Product Description

ADITYA SILICONE RUBBER RTV – 4545. No Shrinkage, A very good alternative for PU Rubber. It comes in 2 parts. Best for big concrete moulds because of longer working time.

It cures at room temperature and can be cured early with an oven. Pigments can be added into it to make colourful moulds.

PART A is very slightly skin-coloured.

Special Features

1. Translucent
2. Less Viscosity for long length flow.
3. Flexible Hard
4. Easy Demoulding
5. Easy 50:50 Ratio by weight or By Volume

Applications : 2 x 2 Tiles, GRC, Big Concrete Moulds, Lace Ends. If You want to make concrete mould by pouring and it has lot of design and shrinage is an issue in your other moulds then use it, it has not shrinkage. Must Apply NON-STICKY AGENT on the master model everywhere, So that Silicone does not stick with master model and cures well.

Technical Properties

Hardness Shore A……After Cure……40

Viscosity…………………………………15000

Mixing Ratio Part  A…………………50 % by weight

Mixing Ratio Part  B …………………50 % by weight

Working Time……………………………….45 Minutes

Curing Time……………………………12 Hours

Colour…………………………………Translucent

Packing

0.5 kg Part A + 0.5 kg Part B

10 kg Part A + 10 kg Part B